UniaxialMaterial Command: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(4 intermediate revisions by 3 users not shown)
Line 29: Line 29:
**[[DoddRestrepo  | Dodd Restrepo]]
**[[DoddRestrepo  | Dodd Restrepo]]
**[[RambergOsgoodSteel Material]]
**[[RambergOsgoodSteel Material]]
**[[SteelMPF - Menegotto and Pinto (1973) Model Extended by Filippou et al. (1983)]]
**[[UVCuniaxial (Updated Voce-Chaboche)]]
*Concrete Materials
*Concrete Materials
**[[Concrete01 Material -- Zero Tensile Strength]]
**[[Concrete01 Material -- Zero Tensile Strength]]
Line 38: Line 40:
**[[ConfinedConcrete01 Material]]
**[[ConfinedConcrete01 Material]]
**[[ConcreteD]]
**[[ConcreteD]]
**[[FRPConfinedConcrete]]
**[[ConcreteCM - Complete Concrete Model by Chang and Mander (1994)]]
*Some Standard Uniaxial Materials
*Some Standard Uniaxial Materials
**[[Elastic Uniaxial Material]]
**[[Elastic Uniaxial Material]]
Line 86: Line 90:
**[[AxialSpHD Material]]
**[[AxialSpHD Material]]
**[[Pinching Limit State Material]]
**[[Pinching Limit State Material]]
**[[CFSWSWP | CFSWSWP Wood Sheathed cold-formed Steel Shear Wall Panel]]
**[[CFSWSWP | CFSWSWP Wood-Sheathed Cold-Formed Steel Shear Wall Panel]]
**[[CFSSSWP | CFSSSWP Steel Sheathed cold-formed Steel Shear Wall Panel]]
**[[CFSSSWP | CFSSSWP Steel-Sheathed Cold-formed Steel Shear Wall Panel]]

Latest revision as of 13:13, 16 October 2019




This command is used to construct a UniaxialMaterial object which represents uniaxial stress-strain (or force-deformation) relationships.

uniaxialMaterial matType? matTag? arg1? ...


The type of material created and the additional arguments required depends on the matType? provided in the command.


NOTE:

The valid queries to any uniaxial material when creating an ElementRecorder are 'strain,' 'stress,' and 'tangent.' Some materials have additional queries to which they will respond. These are documented in the NOTES section for those materials.


The following contain information about matType? and the args required for each of the available material types: