UniaxialMaterial Command: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 66: Line 66:
***[[TzSimple1 Material]]
***[[TzSimple1 Material]]
***[[QzSimple1 Material]]
***[[QzSimple1 Material]]
***[http://opensees.berkeley.edu/OpenSees/manuals/usermanual/1255.htm  PyLiq1 Material]
***[[PyLiq1 Material]]
***[http://opensees.berkeley.edu/OpenSees/manuals/usermanual/1255.htm TzLiq1 Material]
***[http://opensees.berkeley.edu/OpenSees/manuals/usermanual/1255.htm TzLiq1 Material]
***[http://opensees.berkeley.edu/OpenSees/manuals/usermanual/1257.htm  PySimple1Gen Command]
***[http://opensees.berkeley.edu/OpenSees/manuals/usermanual/1257.htm  PySimple1Gen Command]
***[http://opensees.berkeley.edu/OpenSees/manuals/usermanual/1261.htm TzSimple1Gen Command]
***[http://opensees.berkeley.edu/OpenSees/manuals/usermanual/1261.htm TzSimple1Gen Command]

Revision as of 23:47, 16 May 2011




This command is used to construct a UniaxialMaterial object which represents uniaxial stress-strain (or force-deformation) relationships.

uniaxialMaterial matType? arg1? ...


The type of material created and the additional arguments required depends on the matType? provided in the command.


NOTE:

The valid queries to any uniaxial material when creating an ElementRecorder are 'strain,' 'stress,' and 'tangent.' Some materials have additional queries to which they will respond. These are documented in the NOTES section for those materials.


The following contain information about matType? and the args required for each of the available material types: