BeamColumnJoint Element

From OpenSeesWiki
Jump to navigation Jump to search




This command is used to construct a two-dimensional beam-column-joint element object. The element may be used with both two-dimensional and three-dimensional structures; however, load is transferred only in the plane of the element.

element beamColumnJoint $eleTag $Nd1 $Nd2 $Nd3 $Nd4 $Mat1 $Mat2 $Mat3 $Mat4 $Mat5 $Mat6 $Mat7 $Mat8 $Mat9 $Mat10 $Mat11 $Mat12 $Mat13 <$eleHeightFac $eleWidthFac>


$Tag unique element object tag
$Nd1 $Nd2 $Nd3 $Nd4 four nodes
$Mat1 uniaxial material tag for left bar-slip spring at node 1
$Mat2 uniaxial material tag for right bar-slip spring at node 1
$Mat3 uniaxial material tag for interface-shear spring at node 1
$Mat4 uniaxial material tag for lower bar-slip spring at node 2
$Mat5 uniaxial material tag for upper bar-slip spring at node 2
$Mat6 uniaxial material tag for interface-shear spring at node 2
$Mat7 uniaxial material tag for left bar-slip spring at node 3
$Mat8 uniaxial material tag for right bar-slip spring at node 3
$Mat9 uniaxial material tag for interface-shear spring at node 3
$Mat10 uniaxial material tag for lower bar-slip spring at node 4
$Mat11 uniaxial material tag for upper bar-slip spring at node 4
$Mat12 uniaxial material tag for interface-shear spring at node 4
$Mat13 uniaxial material tag for shear-panel
$eleHeightFac floating point value (as a ratio to the total height of the element) to be considered for determination of the distance in between the tension-compression couples (optional, default: 1.0)
$eleWidthFac floating point value (as a ratio to the total width of the element) to be considered for determination of the distance in between the tension-compression couples (optional, default: 1.0)



EXAMPLE:

BeamColumnJointExample - the original file (has some errors)

BeamColumnJointExample_Corrected (corrected by Vesna Terzic)


REFERENCES:

Lowes, Laura N.; Mitra, Nilanjan; Altoontash, Arash A beam-column joint model for simulating the earthquake response of reinforced concrete frames PEER-2003/10 Pacific Earthquake Engineering Research Center, University of California, Berkeley 2003 59 pages (400/P33/2003-10)



Code Developed by: Nilanjan Mitra, Cal Poly