BuildingTclViewer Input Menu: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
 
(5 intermediate revisions by the same user not shown)
Line 2: Line 2:
[[Image:BuildingTclLogo.gif|link=BuildingTcl|right]]
[[Image:BuildingTclLogo.gif|link=BuildingTcl|right]]


== Input Management -- create or edit ==
The input menu allows the user to creat new BuildingTcl objects or to modify existing ones.
</noinclude>
 
 
[[Image:BuildingTclViewerInputMenu.JPG|link=BuildingTclViewer Input Menu]]
[[Image:BuildingTclViewerInputMenu.JPG|link=BuildingTclViewer Input Menu]]


The user can either create new or edit a library of the following BuildingTcl objects:
The user can either create new or edit a library of the following BuildingTcl objects:
* Material
*[[BuildingTclViewer Input Menu -- Common Characteristics |Common Characteristics ]]
* Section
*[[BuildingTclViewer Input Menu -- Material |Material ]]
* ElementType
*[[BuildingTclViewer Input Menu -- Section |Section ]]
* AnalysisModel
*[[BuildingTclViewer Input Menu -- ElementType |ElementType ]]
* Load
*[[BuildingTclViewer Input Menu -- AnalysisModel |AnalysisModel ]]
* LoadCombination
*[[BuildingTclViewer Input Menu -- Load |Load ]]
* Model
*[[BuildingTclViewer Input Menu -- LoadCombination|LoadCombination]]
* Model -- There are three ModelTypes available in BuildingTcl:
**[[BuildingTclViewer Input Menu -- Elevation Model|Elevation Model]]
**[[BuildingTclViewer Input Menu -- Plan Model|Plan Model]]
**[[BuildingTclViewer Input Menu -- 3DFrame Model|3DFrame Model]]


These BuildingTcl objects have been presented in the [[BuildingTcl Command Language Manual]]
These input arguments for these BuildingTcl objects have been presented in the [[BuildingTcl Command Language Manual]]


<noinclude>
<noinclude>
== [[BuildingTclViewer Input Menu -- Common Characteristics |Common Characteristics ]] ==
== [[BuildingTclViewer Input Menu -- Material |Material ]] ==
== [[BuildingTclViewer Input Menu -- Section |Section ]] ==
== [[BuildingTclViewer Input Menu -- ElementType |ElementType ]] ==
== [[BuildingTclViewer Input Menu -- AnalysisModel |AnalysisModel ]] ==
== [[BuildingTclViewer Input Menu -- Load |Load ]] ==
== [[BuildingTclViewer Input Menu -- LoadCombination|LoadCombination]] ==
A LoadCombination is the final step in defining the loading and analysis. It uses previously-defined Loads and previously-defined AnalysisModels.
== Model ==
There are three ModelTypes available in BuildingTcl:
;*[[BuildingTclViewer Input Menu -- Elevation Model|Elevation Model]]
:Define elevation geometry (bay widths and story heights)
:Define frame elements (Columns, Beams, etc)
:Define gravity Loads
:Define support boundary conditions
;*[[BuildingTclViewer Input Menu -- Plan Model|Plan Model]]
:Define floor plan bay widths in two directions
:Label plan lines
;*[[BuildingTclViewer Input Menu -- 3DFrame Model|3DFrame Model]]
:Select one Plan model which controls the bay widths
:Assign different elevations on the plan model
[[Image:BuildingTclViewerInputModelType.JPG|link=BuildingTclViewer Input Menu]]
----
----
[[BuildingTclViewer User Manual|Return to BuildingTclViewer User Manual]]
[[BuildingTclViewer User Manual|Return to BuildingTclViewer User Manual]]
</noinclude>
</noinclude>

Latest revision as of 18:12, 29 December 2009

The input menu allows the user to creat new BuildingTcl objects or to modify existing ones.


The user can either create new or edit a library of the following BuildingTcl objects:

These input arguments for these BuildingTcl objects have been presented in the BuildingTcl Command Language Manual



Return to BuildingTclViewer User Manual