Initial Strain Material

From OpenSeesWiki
Revision as of 22:13, 6 September 2011 by Vesna (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search




This command is used to construct an Initial Strain material object. The stress-strain behaviour for this material is defined by another material. Initial Strain Material enables definition of initial strains for the material under consideration. The stress that corresponds to the initial strain will be calculated from the other material.

uniaxialMaterial InitStrainMaterial $matTag $otherTag $initStrain


$matTag integer tag identifying material
$otherTag tag of the other material
$initStrain initial strain