Record Command

From OpenSeesWiki
Revision as of 19:08, 11 March 2011 by Fmk (talk | contribs)
Jump to navigation Jump to search




This command is used to cause all the recorders to do a record on the current state of the model.

record


NOTE: A record is issued after every successfull static or transient analysis step. Sometimes the user may need the record to be issued on more occasions than this, for example if the user is just looking to record the eigenvalues after an eigen command or for example the user wishes to include the state of the model at time 0.0 before any analysis has been completed.


Code Developed by: fmk