Corotational Truss Element

From OpenSeesWiki
Revision as of 21:27, 3 March 2010 by Fmk (talk | contribs)
Jump to navigation Jump to search




This command is used to construct a corotational truss element object. There are two ways to construct a corotational truss element object:

One way is to specify an area and a UniaxialMaterial identifier:

element corotTruss $eleTag $iNode $jNode $A $matTag <-rho $rho> <-doRayleigh $rFlag>


the other is to specify a Section identifier:

element corotTrussSection $eleTag $iNode $jNode $secTag <-rho $rho> <-doRayleigh $rFlag>




$eleTag unique element object tag
$iNode $jNode end nodes
$A cross-sectional area of element
$matTag tag associated with previously-defined UniaxialMaterial
$secTag tag associated with previously-defined Section
$rho optional, mass per unit length, default = 0.0
$rFlag optional, default = 0
rFlag = 0 NO RAYLEIGH DAMPING (default)
rFlag = 1 include rayleigh damping


NOTE:

  • When constructed with a UniaxialMaterial object, the corotational truss element considers strain-rate effects, and is thus suitable for use as a damping element.
  • The valid queries to a truss element when creating an ElementRecorder object are 'axialForce,' 'stiff,' deformations,' 'material matArg1 matArg2...,' 'section sectArg1 sectArg2...' There will be more queries after the interface for the methods involved have been developed further.
  • For backward compatability the command 'element corotTruss $eleTag $iNode $jNode $secTag will still work and produce a CorotTrussSection element.
  • There was an inconsistancy in the way damping was treated between element types before version 2.2.0. Before 2.2.0, a CorotTruss DID NOT INCLUDE rayleigh damping, a CorotTrussSection did. By default they both DO NOT now include rayleigh damping by default.

EXAMPLE:

element truss 1 2 4 5.5 9; # truss element with tag 1 added between nodes 2 and 4 with area 5.5 that uses material 9


Code Developed by: fmk