RigidLink command

From OpenSeesWiki
Revision as of 21:20, 3 March 2010 by Fmk (talk | contribs)
Jump to navigation Jump to search




This command is used to construct a single MP_Constraint object.

rigidLink $type $masterNodeTag $slaveNodeTag

$type string-based argument for rigid-link type:
rod only the translational degree-of-freedom will be constrained to be exactly the same as those at the master node
beam both the translational and rotational degrees of freedom are constrained.
$masterNodeTag integer tag identifying the master node
$slaveNodeTag integer tag identifying the slave node


NOTE: The constraint object constructed for the beam option assumes small rotations


EXAMPLE:

rigidLink beam 2 3; # connect node 3 to node 2 via a rigid link-beam.


Code Developed by: fmk