EqualDOF command

From OpenSeesWiki
Revision as of 21:19, 3 March 2010 by Fmk (talk | contribs)
Jump to navigation Jump to search




This command is used to construct a multi-point constraint between nodes.


equalDOF $rNodeTag $cNodeTag $dof1 $dof2 ...

$rNodeTag integer tag identifying the retained, or master node (rNode)
$cNodeTag integer tag identifying the constrained, or slave node (cNode)
$dof1 $dof2 ... nodal degrees-of-freedom that are constrained at the cNode to be the same as those at the rNode
Valid range is from 1 through ndf, the number of nodal degrees-of-freedom.


EXAMPLE:

equalDOF 2 3 1 3 5;

  1. impose the displacenebts at dof's 1,3 and 5 of node 3 to be the same as those of node 2.


Code Developed by: fmk