Viscous Material

From OpenSeesWiki
Revision as of 19:38, 7 July 2023 by Mhscott (talk | contribs) (Remove outdate notes)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search




This command is used to construct a uniaxial viscous material object. stress =C(strain-rate)^alpha

uniaxialMaterial Viscous $matTag $C $alpha

$matTag integer tag identifying material
$C damping coeficient
$alpha power factor (=1 means linear damping)


REFERENCES:

See Eqn 9 in G. Pekcan, J.B.Mander abd S.S. Chen, "Fundamental Considerations for the Design of Non-Linear Viscous Dampers", Earthqauke Engineering & Structural Dynamics 28,1405-1425 (1999)


Code Developed by: Mehrdad Sasani, NEU