Bounding Cam Clay

From OpenSeesWiki
Revision as of 09:34, 23 May 2016 by Mcganncr (talk | contribs)
Jump to navigation Jump to search




This command is used to construct a multi-dimensional bounding surface Cam Clay material object after Borja et al. (2001).

nDMaterial BoundingCamClay $matTag $massDensity $C $bulkMod $OCR $mu_o $alpha $lambda $h $m
$matTag integer tag identifying material
$massDensity mass density
$C ellipsoidal axis ratio
$bulkMod initial bulk modulus
$OCR overconsolidation ratio
$mu_o elastic shear modulus
$alpha pressure-dependent parameter
$lambda soil compressibility index for virgin loading
$h hardening parameter
$m hardening parameter

The material formulations for the BoundingCamClay object are "ThreeDimensional" and "PlaneStrain"


NOTES:

USAGE EXAMPLES:

REFERENCES:

Borja, R.I., Lin, C.-H., and Montans, F.J. (2001) 'Cam-Clay plasticity, Part IV: Implicit integration of anisotropic bounding surface model with nonlinear hyperelasticity and ellipsoidal loading function' Computer Methods in Applied Mechanics and Engineering. 190(26), 3293-3323, doi: 10.1016/S0045-7825(00)00301-7.


Code Developed by Chris McGann & Pedro Arduino, at the University of Washington


Example Analysis