Bidirectional Section

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

This command allows the user to construct a Bidirectional section, which is a stress-resultant plasticity model of two coupled forces. The yield surface is circular and there is combined isotropic and kinematic hardening.

section Bidirectional $secTag $E $Fy $Hiso $Hkin <$code1 $code2>

---

$secTag	unique section tag
$E	elastic modulus
$Fy	yield force
$Hiso	isotropic hardening modulus
$Hkin	kinematic hardening modulus
$code1	section force code for direction 1 (default = Vy)
$code2	section force code for direction 2 (default = P)

NOTES:

• The bidirectional section is a suitable base isolator model and should be used in conjunction with a ZeroLengthSection element to this end.
• The implementation is a generalization of the uniaxial return map algorithm for rate independent plasticity (page 45, Simo and Hughes, 1998)
• The optional code1 and code2 values correspond to the beam cross-section analogy (P, Vy, and Vz = force along section local x, y, and z axes, respectively; T, My, and Mz = moment about section local x, y, and z axes, respectively)

---

Code Developed by: Michael H. Scott, Oregon State University