CFSWSWP

From OpenSeesWiki
Revision as of 01:48, 27 January 2015 by Smailk (talk | contribs)
Jump to navigation Jump to search




This command is used to construct a uniaxialMaterial model that simulates the hysteresis response (Shear strength-Lateral displacement) of a wood sheathed cold-formed steel shear wall panel. The hysteresis model has smooth curves and takes into account the strength and stiffness degradation, as well as pinching effect.

uniaxialMaterial CFSWSWP $tag $height $width $fut $tf $Ife $Ifi $ts $np $ds $Vs $sc $nc $type $openingArea $openingLength

$tag Integer identifier used to tag the material model

$height SWP’s height (mm)

$width SWP’s width (mm)

$fuf Tensile strength of framing members (MPa)

$tf Framing thickness (mm)

$Ife Moment of inertia of the double end-stud (mm4)

$Ifi Moment of inertia of the intermediate stud (mm4)

$ts Sheathing thickness (mm)

$np Sheathing number (one or two sides sheathed)

$ds Screws diameter (mm)

$Vs Screws shear strength (N)

$sc Screw spacing on the sheathing perimeter (mm)

$nc Total number of screw on the sheathing

$type Integer identifier used to define wood sheathing type (DFP=1, OSB=2, CSP=3)

$openingArea Total area of openings (mm²)

$openingLength Cumulative length of openings (mm)