MultiLinear Material

From OpenSeesWiki
Revision as of 19:10, 4 December 2012 by Vesna (talk | contribs)
Jump to navigation Jump to search




This command is used to construct a uniaxial multilinear material object.

uniaxialMaterial MultiLinear $matTag $u1 $f1 $u2 $f2 $u3 $f3 $u4 $f4 ...

$matTag integer tag identifying material
$u1 $f1 strain and stress (or deformation & force) at first point of the envelope
$u2 $f2 strain and stress (or deformation & force) at second point of the envelope
$u3 $f3 strain and stress (or deformation & force) at third point of the envelope
$u4 $f4 strain and stress (or deformation & force) at fourth point of the envelope


MultiLinear Material -- Hysteretic Behavior


NOTE: Muximum number of points on the envelope is 10.



Code Developed by: Frank Mckenna, UC Berkeley

Images Developed by: Vesna Terzic