ContactMaterial3D

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

This command is used to construct a ContactMaterial3D nDMaterial object.

nDMaterial ContactMaterial3D $matTag $mu $G $c $t

$matTag	unique integer tag identifying nDMaterial object
$mu	interface frictional coefficient
$G	interface stiffness parameter
$c	interface cohesive intercept
$t	interface tensileStrength

---

The ContactMaterial3D nDMaterial defines the constitutive behavior of a frictional interface between two bodies in contact. The interface defined by this material object allows for sticking, frictional slip, and separation between the two bodies in a three-dimensional analysis. A regularized Coulomb frictional law is assumed. Information on the theory behind this material can be found in, e.g. Wriggers (2002).

NOTE:

1. The ContactMaterial3D nDMaterial has been written to work with the SimpleContact3D and BeamContact3D element objects.
2. There are no valid recorder queries for this material other than those which are listed with those elements.

EXAMPLE: ContactMaterial3D nDmaterial with tag 1

nDMaterial ContactMaterial3D 1  0.1 1000.0 0.0 0.0

---

Code Developed by: Kathryn Petek, Pedro Arduino, & Peter Mackenzie-Helnwein, at the University of Washington

---

References:

1. Wriggers, P. (2002). Computational Contact Mechanics. John Wilely & Sons, Ltd, West Sussex, England.