Bounding Cam Clay

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

This command is used to construct a multi-dimensional bounding surface Cam Clay material object after Borja et al. (2001).

nDMaterial BoundingCamClay $matTag $massDensity $C $bulkMod $OCR $mu_o $alpha $lambda $h $m

$matTag	integer tag identifying material
$massDensity	mass density
$C	ellipsoidal axis ratio
$bulkMod	initial bulk modulus
$OCR	overconsolidation ratio
$mu_o	elastic shear modulus
$alpha	pressure-dependent parameter
$lambda	soil compressibility index for virgin loading
$h	hardening parameter
$m	hardening parameter

The material formulations for the BoundingCamClay object are "ThreeDimensional" and "PlaneStrain"

---

Code Developed by Chris McGann & Pedro Arduino, at the University of Washington

---

Notes

This nDMaterial object provides the bounding surface plasticity model of Borja et al. (2001) in which the bounding surface model is represented using modified Cam-Clay theory (references). In addition to the standard capabilities of the Cam-Clay family of models (e.g., pressure dependence, hardening with plastic volumetric contraction, softening with plastic dilation, and coupled deviatoric and volumetric plastic deformation), the Borja et al. (2001) model has been enhanced to include an anisotropic bounding surface formulation that allows for consideration of hysteretic behaviour under cyclic loading. This bounding surface Cam-Clay model is coupled with a nonlinear hyperelastic model that considered pressure-dependency in the bulk and shear modulus. The full theory of this model is discussed in great detail in Borja et al. (2001), and the essential ideas are summarized in the theory section of this article.

---

References

Borja, R.I., Lin, C.-H., and Montans, F.J. (2001) 'Cam-Clay plasticity, Part IV: Implicit integration of anisotropic bounding surface model with nonlinear hyperelasticity and ellipsoidal loading function' Computer Methods in Applied Mechanics and Engineering. 190(26), 3293-3323, doi: 10.1016/S0045-7825(00)00301-7.

---

Theory

<math> </math>