Bounding Cam Clay
- Command_Manual
- Tcl Commands
- Modeling_Commands
- model
- uniaxialMaterial
- ndMaterial
- frictionModel
- section
- geometricTransf
- element
- node
- sp commands
- mp commands
- timeSeries
- pattern
- mass
- block commands
- region
- rayleigh
- Analysis Commands
- Output Commands
- Misc Commands
- DataBase Commands
This command is used to construct an multi dimensional material object that has a Bounding surface Cam Clay yield criterium.
nDMaterial BoundingCamClay $matTag $massDensity $C $bulkMod $OCR $mu_o $alpha $lambda $h $m |
$matTag | integer tag identifying material |
$massDensity | mass density |
$C | ellipsoidal axis ratio |
$bulkMod | initial bulk modulus |
$OCR | overconsolidation ratio |
$mu_o | elastic shear modulus |
$alpha | pressure-dependent parameter |
$lambda | soil compressibility index for virgin loading |
$h | hardening parameter |
$m | hardening parameter |
The material formulations for the BoundingCamClay object are "ThreeDimensional" and "PlaneStrain"
NOTES:
EXAMPLES:
Code Developed by: Chris McGann & Pedro Arduino, at the University of Washington
EXAMPLE ANALYSIS: