CFSWSWP

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

This command is used to construct a uniaxialMaterial model that simulates the hysteresis response (Shear strength-Lateral displacement) of a wood sheathed cold-formed steel shear wall panel (CFS-SWP). The hysteresis model has smooth curves and takes into account the strength and stiffness degradation, as well as pinching effect.

uniaxialMaterial CFSWSWP $tag $height $width $fut $tf $Ife $Ifi $ts $np $ds $Vs $sc $nc $type $openingArea $openingLength

---

$matTag	Integer identifier used to tag the material model
$height	SWP’s height (mm)
$width	SWP’s width (mm)
$fuf	Tensile strength of framing members (MPa)
$tf	Framing thickness (mm)
$Ife	Moment of inertia of the double end-stud (mm4)
$Ifi	Moment of inertia of the intermediate stud (mm4)
$ts	Sheathing thickness (mm)
$np	Sheathing number (one or two sides sheathed)
$ds	Screws diameter (mm)
$Vs	Screws shear strength (N)
$sc	Screw spacing on the sheathing perimeter (mm)
$nc	Total number of screw on the sheathing
$type	Integer identifier used to define wood sheathing type (DFP=1, OSB=2, CSP=3)
$openingArea	Total area of openings (mm²)
$openingLength	Cumulative length of openings (mm)

---

Code Developed by: Smail Kechidi and Nouredine Bourahla, University of Blida 1, Algeria

Images Developed by: Smail Kechidi, University of Blida 1