Corotational Truss Element
- Command_Manual
- Tcl Commands
- Modeling_Commands
- model
- uniaxialMaterial
- ndMaterial
- frictionModel
- section
- geometricTransf
- element
- node
- sp commands
- mp commands
- timeSeries
- pattern
- mass
- block commands
- region
- rayleigh
- Analysis Commands
- Output Commands
- Misc Commands
- DataBase Commands
This command is used to construct a corotational truss element object. There are two ways to construct a corotational truss element object:
One way is to specify an area and a UniaxialMaterial identifier:
| element corotTruss $eleTag $iNode $jNode $A $matTag <-rho $rho> |
the other is to specify a Section identifier:
| element corotTrussSection $eleTag $iNode $jNode $secTag <-rho $rho> |
| $eleTag | unique element object tag |
| $iNode $jNode | end nodes |
| $A | cross-sectional area of element |
| $matTag | tag associated with previously-defined UniaxialMaterial |
| $secTag | tag associated with previously-defined Section |
| $rho | optional, mass per unit length, default = 0.0 |
NOTE:
- When constructed with a UniaxialMaterial object, the corotational truss element considers strain-rate effects, and is thus suitable for use as a damping element.
- The valid queries to a truss element when creating an ElementRecorder object are 'axialForce,' 'stiff,' deformations,' 'material matArg1 matArg2...,' 'section sectArg1 sectArg2...' There will be more queries after the interface for the methods involved have been developed further.
- For backward compatability the command 'element corotTruss $eleTag $iNode $jNode $secTag will still work and produce a CorotTrussSection element.
- CorotTruss DOES include Rayleigh damping by default. Truss DOES NOT.
EXAMPLE:
element truss 1 2 4 5.5 9; # truss element with tag 1 added between nodes 2 and 4 with area 5.5 that uses material 9
Code Developed by: fmk