LoadConst Command

From OpenSeesWiki
Revision as of 05:06, 27 February 2010 by Fmk (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search




This command is used to set the loads constant in the domain and to also set the time in the domain. When setting the loads constant, the procedure will invoke setLoadConst() on all LoadPattern objects which exist in the domain at the time the command is called.

loadConst <-time $pseudoTime>

$pseudoTime Time domain is to be set to (optional)


NOTE:

Load Patterns added afer this command is invoked are not set to constant.


EXAMPLE:

loadConst -time 0.0; # sets loads constant and resets time to be 0.0


Code Developed by: fmk