Enhanced Strain Quadrilateral Element

From OpenSeesWiki
Revision as of 06:53, 28 January 2018 by Aschellenberg (talk | contribs)
Jump to navigation Jump to search




This command is used to construct a four-node quadrilateral element, which uses a bilinear isoparametric formulation with enhanced strain modes.


element enhancedQuad $eleTag $iNode $jNode $kNode $lNode $thick $type $matTag




$eleTag unique element object tag
$iNode $jNode $kNode $lNode four nodes defining element boundaries, input in counter-clockwise order around the element.
$thick element thickness
$type string representing material behavior. Valid options depend on the NDMaterial object and its available material formulations. The type parameter can be either "PlaneStrain" or "PlaneStress."
$matTag tag of nDMaterial


NOTE:

  1. The valid queries to a Quad element when creating an ElementRecorder object are 'forces', 'stresses,' and 'material $matNum matArg1 matArg2 ...' Where $matNum refers to the material object at the integration point corresponding to the node numbers in the isoparametric domain.


EXAMPLE:


REFERENCES:



Code Developed by: Edward Love, Sandia National Laboratories