Integrator Command

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

This command is used to construct the Integrator object. The Integrator object determines the meaning of the terms in the system of equation object Ax=B.

The Integrator object is used for the following:

   * determine the predictive step for time t+dt
   * specify the tangent matrix and residual vector at any iteration
   * determine the corrective step based on the displacement increment dU

The type of integrator used in the analysis is dependent on whether it is a static analysis or transient analysis.

Static Integrators:

• Load Control
• Displacement Control
• Minimum Unbalanced Displacement Norm
• Arc-Length Control

Transient Integrators:

• Central Difference
• Newmark Method
• Hilber-Hughes-Taylor Method
• Generalized Alpha Method

TRBDF2