Eigen Command

From OpenSeesWiki
Revision as of 19:38, 19 August 2022 by Mhscott (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search




This command is used to perform the analysis.

eigen <$solver> $numEigenvalues

$numEigenvalues number of eigenvalues required
$solver optional string detailing type of solver: -genBandArpack, -fullGenLapack (default: -genBandArpack)


RETURNS:

a tcl string containg eigenvalues.


NOTES:

  1. The eigenvectors are stored at the nodes and can be printed out using a Node Recorder, the nodeEigenvector command, or the Print command.
  2. The default eigensolver is able to solve only for N-1 eigenvalues, where N is the number of inertial DOFs. When running into this limitation the -fullGenLapack solver can be used instead of the default Arpack solver.
  3. The -fullGenLapack option is VERY SLOW for moderate to large models


THEORY:


<math> \left (K - \lambda M \right ) \Phi = 0 </math>



EXAMPLE:

set eigenvalues [eigen 10];



Code Developed by: fmk