Fiber Section

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

This commnand allows the user to construct a FiberSection object. Each FiberSection object is composed of Fibers, with each fiber containing a UniaxialMaterial, an area and a location (y,z). The command to generate FiberSection object contains in { } the commands to generate all the fibers in the object. To construct a FiberSection and populate it, the following command is used:

section Fiber $secTag {

fiber...

patch...

layer...

...

}

---

$secTag	unique tag among FiberSections
fiber...	command to generate a single fiber.
patch...	command to generate a number of fibers over a geometric cross-section
layer...	command to generate a row of fibers along a geometric-arc

NOTES:

1. The command to generate a FiberSection contains in { } the commands to generate all the fibers in the section.
2. The patch and layer commands can be used to generate multiple fibers in a single command.
3. In an element recorder you can ask a FiberSection for it's 'deformations', 'forces', 'forceAndDeformation', 'fiber $fiberNum $matArg1 ..', 'fiber $yLoc $zLoc $matTag $matArg1 '

---

<uml> FiberSection o- Fiber </uml>

---

Code Developed by: Micheal H. Scott, Oregon State University