LimitStateMaterialExampleDebugged: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 24: | Line 24: | ||
'''Time history analysis | '''Time history analysis''' | ||
Main file to source to perform pushover analysis is: | |||
*[[CenterCol_basicModel_Dynamic.tcl]] | |||
Supporting files to be stored in the same folder with the main file: | |||
#[[CenterColAxialSpring.tcl]] | |||
#[[CenterColShearSpring.tcl]] | |||
#[[CenterColSecFiber.tcl]] | |||
#[[tags.tcl]] | |||
#[[Dynamic.EQ.Uniform_LimitState.tcl]] | |||
#[[LibAnalysisDynamicParameters_LimitState.tcl]] | |||
#[[Media:ReadSMDFile.tcl]] | |||
#[[Media:DisplayModel2D.tcl]] | |||
#[[Media:DisplayPlane.tcl]] | |||
#[[Media: TCU047-N.tcl]] | |||
Revision as of 20:13, 10 November 2011
- Command_Manual
- Tcl Commands
- Modeling_Commands
- model
- uniaxialMaterial
- ndMaterial
- frictionModel
- section
- geometricTransf
- element
- node
- sp commands
- mp commands
- timeSeries
- pattern
- mass
- block commands
- region
- rayleigh
- Analysis Commands
- Output Commands
- Misc Commands
- DataBase Commands
Application of a limit state material is demonstrated on an example of a column modeled with force-based beam-column element. Three types of analysis are performed on a same column:
- pushover analysis
- cyclic analysis
- time history analysis
Static analyses: pushover and cyclic
Main file to source to perform pushover analysis is:
Main file to source to perform cyclic analysis is:
Supporting files to be stored in the same folder with the main file:
Time history analysis
Main file to source to perform pushover analysis is:
Supporting files to be stored in the same folder with the main file: