FixZ command: Difference between revisions
Jump to navigation
Jump to search
(New page: This command is used to construct multiple homogeneous single-point boundary constraints for all nodes whose z-coordinate lies within a specified distance from a specified coordinate. {| ...) |
No edit summary |
||
| Line 1: | Line 1: | ||
{{CommandManualMenu}} | |||
This command is used to construct multiple homogeneous single-point boundary constraints for all nodes whose z-coordinate lies within a specified distance from a specified coordinate. | This command is used to construct multiple homogeneous single-point boundary constraints for all nodes whose z-coordinate lies within a specified distance from a specified coordinate. | ||
Latest revision as of 21:19, 3 March 2010
- Command_Manual
- Tcl Commands
- Modeling_Commands
- model
- uniaxialMaterial
- ndMaterial
- frictionModel
- section
- geometricTransf
- element
- node
- sp commands
- mp commands
- timeSeries
- pattern
- mass
- block commands
- region
- rayleigh
- Analysis Commands
- Output Commands
- Misc Commands
- DataBase Commands
This command is used to construct multiple homogeneous single-point boundary constraints for all nodes whose z-coordinate lies within a specified distance from a specified coordinate.
| fixZ $zCoordinate (ndf $ConstrValues) <-tol $tol> |
| $zCordinate | z-coordinate of nodes to be constrained |
| $constrValues | ndf constraint values (0 or 1) corresponding to the ndf degrees-of-freedom. |
| 0 unconstrained (or free) | |
| 1 constrained (or fixed) | |
| $tol | user-defined tolerance (optional, default = 1e-10) |
EXAMPLE:
fixZ 0.0 1 1 1 1 1 1; # fully restrain all nodes in x-y plane at origin (z=0.0)
Code Developed by: fmk