NDMaterial Command

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

This command is used to construct an NDMaterial object which represents the stress-strain relationship at the gauss-point of a continuum element.

nDMaterial matType? arg1? ...

---

The type of material created and the additional arguments required depends on the matType? provided in the command.

NOTE:

The valid queries to any uniaxial material when creating an ElementRecorder are 'strain', and 'stress'. Some materials have additional queries to which they will respond. These are documented in the NOTES section for those materials.

The following contain information about matType? and the args required for each of the available material types:

• Elastic Isotropic Material
• Elastic Orthotropic Material
• J2 Plasticity Material
• Drucker Prager Material
• Concrete Damage Model
• Plane Stress Material
• Plane Strain Material
• Multi Axial Cyclic Plasticity
• Bounding Surface Cam Clay Material
• Plate Fiber Material
• Plane Stress Concrete Materials
• FSAM - 2D RC Panel Constitutive Behavior
• Tsinghua Sand Models
  • CycLiqCP Material (Cyclic ElasticPlasticity)
  • CycLiqCPSP Material
• Manzari Dafalias Material
• PM4Sand Material
• PM4Silt Material (Beta)
• Stress Density Material
• Materials for Modeling Concrete Walls
  • PlaneStressUserMaterial
  • PlateFromPlaneStress
  • PlateRebar
  • LayeredShell
• Contact Materials for 2D and 3D
  • ContactMaterial2D
  • ContactMaterial3D
• Wrapper material for Initial State Analysis
  • InitialStateAnalysisWrapper
• UC San Diego soil models (Linear/Nonlinear, dry/drained/undrained soil response under general 2D/3D static/cyclic loading conditions (please visit UCSD for examples)
  • PressureIndependMultiYield Material
  • PressureDependMultiYield Material
  • PressureDependMultiYield02 Material
  • PressureDependMultiYield03 Material
• UC San Diego Saturated Undrained soil
  • FluidSolidPorousMaterial
• Misc.
  • AcousticMedium