CFSSSWP: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 45: Line 45:
|}
|}
----
----


'''DESCRIPTION:'''
'''DESCRIPTION:'''


The uniaxial hysteresis model of Cold-Formed Steel Shear Wall Panel (CFS-SWP) consists of three parts: backbone curves of the hysteresis loops (states 1 and 2), hysteresis criteria (unloading-reloading path: states 3 and 4) (Fig.2) and deterioration criteria. The following paragraphs will respectively introduce the terms of the three parts.
The uniaxial hysteresis model of Cold-Formed Steel Shear Wall Panel (CFS-SWP) consists of three parts: backbone curves of the hysteresis loops (states 1 and 2), hysteresis criteria (unloading-reloading path: states 3 and 4) (Fig.2) and deterioration criteria. The following paragraphs will respectively introduce the terms of the three parts.
Maximum lateral shear strength and the associated displacement are assessed using two analytical methods for wood and steel sheathed CFS SWP proposed by, respectively, Xu L and Martinez J (2007), and Yanari N and Yu C (2013) which take into account a wide range of factors that affect the behaviour and strength of a CFS SWP, namely: material properties, thickness and geometry of sheathing and framing, spacing of studs, construction details such as size and spacing of sheathing-to-framing connections.  
Maximum lateral shear strength and the associated displacement are assessed using two analytical methods for wood and steel sheathed CFS SWP proposed by, respectively, Xu L and Martinez J (2007), and Yanari N and Yu C (2013) which take into account a wide range of factors that affect the behaviour and strength of a CFS SWP, namely: material properties, thickness and geometry of sheathing and framing, spacing of studs, construction details such as size and spacing of sheathing-to-framing connections.  
In addition to the envelope curve, the proposed hysteresis model requires the introduction of parameters that define the strength and stiffness deterioration, as well as the pinching effect under cyclic loading. Compared to the monotonic test result, the hysteresis response of CFS SWP exhibits strength deterioration; even if the displacement associated to peak strength has not been reached yet. The stiffness deterioration of the proposed model is positively related to strength degraded degree, and is defined in a same way as the strength deterioration.
In addition to the envelope curve, the proposed hysteresis model requires the introduction of parameters that define the strength and stiffness deterioration, as well as the pinching effect under cyclic loading. Compared to the monotonic test result, the hysteresis response of CFS SWP exhibits strength deterioration; even if the displacement associated to peak strength has not been reached yet. The stiffness deterioration of the proposed model is positively related to strength degraded degree, and is defined in a same way as the strength deterioration.



Revision as of 16:41, 29 January 2015




This command is used to construct a uniaxialMaterial model that simulates the hysteresis response (Shear strength-lateral Displacement) of a steel sheathed Cold-Formed Steel Shear Wall Panel (CFS-SWP). The hysteresis model has smooth curves and takes into account the strength and stiffness degradation, as well as pinching effect.

uniaxialMaterial CFSSSWP $tag $height $width $fuf $fyf $tf $Af $fus $fys $ts $np $ds $Vs $sc $dt $openingArea $openingLength

$matTag Integer identifier used to tag the material model
$height SWP’s height (mm)
$width SWP’s width (mm)
$fuf Tensile strength of framing members (MPa)
$fyf Yield strength of framing members (MPa)
$tf Framing thickness (mm)
$Af Framing cross section area (mm²)
$fus Tensile strength of steel sheet sheathing (MPa)
$fys Yield strength of steel sheet sheathing (MPa)
$ts Sheathing thickness (mm)
$np Sheathing number (one or two sides sheathed)
$ds Screws diameter (mm)
$Vs Screws shear strength (N)
$sc Screw spacing on the sheathing perimeter (mm)
$dt Anchor bolt’s diameter (mm)
$openingArea Total area of openings (mm²)
$openingLength Cumulative length of openings (mm)


DESCRIPTION:

The uniaxial hysteresis model of Cold-Formed Steel Shear Wall Panel (CFS-SWP) consists of three parts: backbone curves of the hysteresis loops (states 1 and 2), hysteresis criteria (unloading-reloading path: states 3 and 4) (Fig.2) and deterioration criteria. The following paragraphs will respectively introduce the terms of the three parts.


Maximum lateral shear strength and the associated displacement are assessed using two analytical methods for wood and steel sheathed CFS SWP proposed by, respectively, Xu L and Martinez J (2007), and Yanari N and Yu C (2013) which take into account a wide range of factors that affect the behaviour and strength of a CFS SWP, namely: material properties, thickness and geometry of sheathing and framing, spacing of studs, construction details such as size and spacing of sheathing-to-framing connections.


In addition to the envelope curve, the proposed hysteresis model requires the introduction of parameters that define the strength and stiffness deterioration, as well as the pinching effect under cyclic loading. Compared to the monotonic test result, the hysteresis response of CFS SWP exhibits strength deterioration; even if the displacement associated to peak strength has not been reached yet. The stiffness deterioration of the proposed model is positively related to strength degraded degree, and is defined in a same way as the strength deterioration.


Code Developed by: Smail Kechidi and Nouredine Bourahla, University of Blida 1, Algeria

Images Developed by: Smail Kechidi, University of Blida 1