CFSWSWP: Difference between revisions
No edit summary |
No edit summary |
||
| Line 11: | Line 11: | ||
$height SWP’s height (mm) | $height SWP’s height (mm) | ||
$width SWP’s width (mm) | $width SWP’s width (mm) | ||
$fuf Tensile strength of framing members (MPa) | $fuf Tensile strength of framing members (MPa) | ||
$tf Framing thickness (mm) | $tf Framing thickness (mm) | ||
$Ife Moment of inertia of the double end-stud (mm4) | $Ife Moment of inertia of the double end-stud (mm4) | ||
$Ifi Moment of inertia of the intermediate stud (mm4) | $Ifi Moment of inertia of the intermediate stud (mm4) | ||
$ts Sheathing thickness (mm) | $ts Sheathing thickness (mm) | ||
$np Sheathing number (one or two sides sheathed) | $np Sheathing number (one or two sides sheathed) | ||
$ds Screws diameter (mm) | $ds Screws diameter (mm) | ||
$Vs Screws shear strength (N) | $Vs Screws shear strength (N) | ||
$sc Screw spacing on the sheathing perimeter (mm) | $sc Screw spacing on the sheathing perimeter (mm) | ||
$nc Total number of screw on the sheathing | $nc Total number of screw on the sheathing | ||
$type Integer identifier used to define wood sheathing type (DFP=1, OSB=2, CSP=3) | $type Integer identifier used to define wood sheathing type (DFP=1, OSB=2, CSP=3) | ||
$openingArea Total area of openings (mm²) | $openingArea Total area of openings (mm²) | ||
$openingLength Cumulative length of openings (mm) | |||
$openingLength Cumulative length of openings (mm) | |||
---- | ---- | ||
Revision as of 01:45, 27 January 2015
- Command_Manual
- Tcl Commands
- Modeling_Commands
- model
- uniaxialMaterial
- ndMaterial
- frictionModel
- section
- geometricTransf
- element
- node
- sp commands
- mp commands
- timeSeries
- pattern
- mass
- block commands
- region
- rayleigh
- Analysis Commands
- Output Commands
- Misc Commands
- DataBase Commands
This command is used to construct a uniaxialMaterial model that simulates the hysteresis response (Shear strength-Lateral displacement) of a wood sheathed cold-formed steel shear wall panel. The hysteresis model has smooth curves and takes into account the strength and stiffness degradation, as well as pinching effect.
| uniaxialMaterial CFSWSWP $tag $height $width $fut $tf $Ife $Ifi $ts $np $ds $Vs $sc $nc $type $openingArea $openingLength |
$tag Integer identifier used to tag the material model
$height SWP’s height (mm)
$width SWP’s width (mm)
$fuf Tensile strength of framing members (MPa)
$tf Framing thickness (mm)
$Ife Moment of inertia of the double end-stud (mm4)
$Ifi Moment of inertia of the intermediate stud (mm4)
$ts Sheathing thickness (mm)
$np Sheathing number (one or two sides sheathed)
$ds Screws diameter (mm)
$Vs Screws shear strength (N)
$sc Screw spacing on the sheathing perimeter (mm)
$nc Total number of screw on the sheathing
$type Integer identifier used to define wood sheathing type (DFP=1, OSB=2, CSP=3)
$openingArea Total area of openings (mm²)
$openingLength Cumulative length of openings (mm)