CFSWSWP: Difference between revisions
No edit summary |
No edit summary |
||
| Line 8: | Line 8: | ||
|} | |} | ||
$tag Integer identifier used to tag the material model | |||
$height SWP’s height (mm) | |||
$width SWP’s width (mm) | |||
$fuf Tensile strength of framing members (MPa) | |||
$tf Framing thickness (mm) | |||
$Ife Moment of inertia of the double end-stud (mm4) | |||
$Ifi Moment of inertia of the intermediate stud (mm4) | |||
$ts Sheathing thickness (mm) | |||
$np Sheathing number (one or two sides sheathed) | |||
$ds Screws diameter (mm) | |||
$Vs Screws shear strength (N) | |||
$sc Screw spacing on the sheathing perimeter (mm) | |||
$nc Total number of screw on the sheathing | |||
$type Integer identifier used to define wood sheathing type (DFP=1, OSB=2, CSP=3) | |||
$openingArea Total area of openings (mm²) | |||
$openingLength Cumulative length of openings (mm) | |||
---- | ---- | ||
Revision as of 01:44, 27 January 2015
- Command_Manual
- Tcl Commands
- Modeling_Commands
- model
- uniaxialMaterial
- ndMaterial
- frictionModel
- section
- geometricTransf
- element
- node
- sp commands
- mp commands
- timeSeries
- pattern
- mass
- block commands
- region
- rayleigh
- Analysis Commands
- Output Commands
- Misc Commands
- DataBase Commands
This command is used to construct a uniaxialMaterial model that simulates the hysteresis response (Shear strength-Lateral displacement) of a wood sheathed cold-formed steel shear wall panel. The hysteresis model has smooth curves and takes into account the strength and stiffness degradation, as well as pinching effect.
| uniaxialMaterial CFSWSWP $tag $height $width $fut $tf $Ife $Ifi $ts $np $ds $Vs $sc $nc $type $openingArea $openingLength |
$tag Integer identifier used to tag the material model $height SWP’s height (mm) $width SWP’s width (mm) $fuf Tensile strength of framing members (MPa) $tf Framing thickness (mm) $Ife Moment of inertia of the double end-stud (mm4) $Ifi Moment of inertia of the intermediate stud (mm4) $ts Sheathing thickness (mm) $np Sheathing number (one or two sides sheathed) $ds Screws diameter (mm) $Vs Screws shear strength (N) $sc Screw spacing on the sheathing perimeter (mm) $nc Total number of screw on the sheathing $type Integer identifier used to define wood sheathing type (DFP=1, OSB=2, CSP=3) $openingArea Total area of openings (mm²) $openingLength Cumulative length of openings (mm)