Corotational Truss Element: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 6: Line 6:


{|  
{|  
| style="background:yellow; color:black; width:800px" | '''element corotTruss $eleTag $iNode $jNode $A $matTag <-rho $rho>'''
| style="background:lime; color:black; width:800px" | '''element corotTruss $eleTag $iNode $jNode $A $matTag <-rho $rho> <-cMass $cFlag> <-doRayleigh $rFlag>'''
|}
|}


Line 13: Line 13:


{|  
{|  
| style="background:yellow; color:black; width:800px" | '''element corotTrussSection $eleTag $iNode $jNode $secTag <-rho $rho>'''
| style="background:lime; color:black; width:800px" | '''element corotTrussSection $eleTag $iNode $jNode $secTag <-rho $rho> <-cMass $cFlag> <-doRayleigh $rFlag>'''
|}
|}


Line 32: Line 32:
| '''$secTag''' || tag associated with previously-defined Section
| '''$secTag''' || tag associated with previously-defined Section
|-
|-
| '''$rho''' || optional, mass per unit length, default = 0.0
| '''$rho''' || mass per unit length, optional, default = 0.0
|-
| '''$cFlag''' || consistent mass flag, optional, default = 0
|-
| || cFlag = 0 lumped mass matrix (default)
|-
| || cFlag = 1 consistent mass matrix
|-
| '''$rFlag''' || Rayleigh damping flag, optional, default = 0
|-
| || rFlag = 0 NO RAYLEIGH DAMPING (default)
|-
| || rFlag = 1 include Rayleigh damping
|}
|}


Line 45: Line 57:
*For backward compatability the command '''element corotTruss $eleTag $iNode $jNode $secTag'' will still work and produce a CorotTrussSection element.
*For backward compatability the command '''element corotTruss $eleTag $iNode $jNode $secTag'' will still work and produce a CorotTrussSection element.


* CorotTruss DOES include Rayleigh damping by default.  Truss DOES NOT.
*CorotTruss DOES NOT include Rayleigh damping by default.


EXAMPLE:
EXAMPLE:
Line 53: Line 65:
----
----


Code Developed by: <span style="color:blue"> fmk </span>
Code Developed by: <span style="color:blue"> MHS </span>

Revision as of 01:45, 22 August 2014




This command is used to construct a corotational truss element object. There are two ways to construct a corotational truss element object:

One way is to specify an area and a UniaxialMaterial identifier:

element corotTruss $eleTag $iNode $jNode $A $matTag <-rho $rho> <-cMass $cFlag> <-doRayleigh $rFlag>


the other is to specify a Section identifier:

element corotTrussSection $eleTag $iNode $jNode $secTag <-rho $rho> <-cMass $cFlag> <-doRayleigh $rFlag>




$eleTag unique element object tag
$iNode $jNode end nodes
$A cross-sectional area of element
$matTag tag associated with previously-defined UniaxialMaterial
$secTag tag associated with previously-defined Section
$rho mass per unit length, optional, default = 0.0
$cFlag consistent mass flag, optional, default = 0
cFlag = 0 lumped mass matrix (default)
cFlag = 1 consistent mass matrix
$rFlag Rayleigh damping flag, optional, default = 0
rFlag = 0 NO RAYLEIGH DAMPING (default)
rFlag = 1 include Rayleigh damping


NOTE:

  • When constructed with a UniaxialMaterial object, the corotational truss element considers strain-rate effects, and is thus suitable for use as a damping element.
  • The valid queries to a truss element when creating an ElementRecorder object are 'axialForce,' 'stiff,' deformations,' 'material matArg1 matArg2...,' 'section sectArg1 sectArg2...' There will be more queries after the interface for the methods involved have been developed further.
  • For backward compatability the command 'element corotTruss $eleTag $iNode $jNode $secTag will still work and produce a CorotTrussSection element.
  • CorotTruss DOES NOT include Rayleigh damping by default.

EXAMPLE:

element truss 1 2 4 5.5 9; # truss element with tag 1 added between nodes 2 and 4 with area 5.5 that uses material 9


Code Developed by: MHS