BWBN Material: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
mNo edit summary
No edit summary
Line 29: Line 29:
|}
|}


----


PARAMETER ESTIMATION:
[[BWBNParameterEstimation]]
----


REFERENCES:
REFERENCES:
Line 41: Line 47:
Foliente, G. C. (1995). Hysteresis modeling of wood joints and structural systems. Journal of Structural Engineering, 121(6), 1013-1022.
Foliente, G. C. (1995). Hysteresis modeling of wood joints and structural systems. Journal of Structural Engineering, 121(6), 1013-1022.


----


DEVELOPED BY:
DEVELOPED BY:
Raquibul Hossain, The University of Queensland, Australia
Raquibul Hossain, The University of Queensland, Australia

Revision as of 07:51, 21 October 2013




This command is used to construct a uniaxial Bouc-Wen pinching hysteretic material object. This material model is an extension of the original Bouc-Wen model that includes pinching (Baber and Noori (1986) and Foliente (1995)).

uniaxialMaterial BWBN $matTag $alpha $ko $n $gamma $beta $Ao $q $zetas $p $Shi $deltaShi $lambda $tol $maxIter

$matTag integer tag identifying material
$alpha ratio of post-yield stiffness to the initial elastic stiffenss (0< <math>\alpha</math> <1)
$ko initial elastic stiffness
$n parameter that controls transition from linear to nonlinear range (as n increases the transition becomes sharper; n is usually grater or equal to 1)
$gamma $beta parameters that control shape of hysteresis loop; depending on the values of <math>\gamma</math> and <math>\beta</math> softening, hardening or quasi-linearity can be simulated (look at the BoucWen Material)
$Ao parameter that controls tangent stiffness
$q $zetas $p $Shi $deltaShi $lambda parameters that control pinching
$tol tolerance
$maxIter maximum iterations

PARAMETER ESTIMATION:

BWBNParameterEstimation


REFERENCES:

Hossain, M. R., Ashraf, M., & Padgett, J. E. (2013). "Risk-based seismic performance assessment of Yielding Shear Panel Device." Engineering Structures, 56, 1570-1579.

Hossain, M. R., & Ashraf, M. (2012). "Mathematical modelling of yielding shear panel device." Thin-Walled Structures, 59, 153-161.

Baber, T. T., & Noori, M. N. (1986). "Modeling general hysteresis behavior and random vibration application." Journal of Vibration Acoustics Stress and Reliability in Design, 108, 411.

Foliente, G. C. (1995). Hysteresis modeling of wood joints and structural systems. Journal of Structural Engineering, 121(6), 1013-1022.


DEVELOPED BY: Raquibul Hossain, The University of Queensland, Australia