Velocity Dependent Friction: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 24: | Line 24: | ||
<math>\[\mu = {\mu _{fast}} - \left( {{\mu _{fast}} - {\mu _{slow}}} \right) \cdot {e^{ - transRate\, \cdot \,\left| v \right|}}\]</math> | <math>\[\mu = {\mu _{fast}} - \left( {{\mu _{fast}} - {\mu _{slow}}} \right) \cdot {e^{ - transRate\, \cdot \,\left| v \right|}}\]</math> | ||
[[File:VDepemdentFriction01.jpg]] | |||
EXAMPLE: | |||
frictionModel VDependent 1 0.085 0.163 0.77 | frictionModel VDependent 1 0.085 0.163 0.77 | ||
Revision as of 03:39, 23 January 2012
- Command_Manual
- Tcl Commands
- Modeling_Commands
- model
- uniaxialMaterial
- ndMaterial
- frictionModel
- section
- geometricTransf
- element
- node
- sp commands
- mp commands
- timeSeries
- pattern
- mass
- block commands
- region
- rayleigh
- Analysis Commands
- Output Commands
- Misc Commands
- DataBase Commands
This command is used to construct a VDependent friction model object. It is useful for modeling the behavior of "PTFE" or PTFE-like materials sliding on a stainless steel surface. For a detailed presentation on the velocity dependence of such interfaces please refer to Constantinou et al. (1999).
| frictionModel VDependent $frnTag $muSlow $muFast $transRate |
| $frnTag | unique friction model object tag |
| $muSlow | coefficient of friction at low velocity |
| $muFast | coefficient of friction at high velocity |
| $transRate | transition rate from low to high velocity |
<math>\[\mu = {\mu _{fast}} - \left( {{\mu _{fast}} - {\mu _{slow}}} \right) \cdot {e^{ - transRate\, \cdot \,\left| v \right|}}\]</math>
EXAMPLE:
frictionModel VDependent 1 0.085 0.163 0.77
Code Developed by: Andreas Schellenberg, University of California, Berkeley.