Velocity Dependent Friction: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 24: Line 24:
<math>t + \Delta t\!</math>
<math>t + \Delta t\!</math>


:<math> \mu  = {\mu _{fast}} - \left( {{\mu _{fast}} - {\mu _{slow}}} \right) \cdot {e^{ - transRate\, \cdot \,\left| v \right|}}\</math>
<math>\mu  = {\mu _{fast}} - \left( {{\mu _{fast}} - {\mu _{slow}}} \right) \cdot {e^{ - transRate\, \cdot \,\left| v \right|}}\!</math>





Revision as of 03:23, 23 January 2012




This command is used to construct a VDependent friction model object. It is useful for modeling the behavior of "PTFE" or PTFE-like materials sliding on a stainless steel surface. For a detailed presentation on the velocity dependence of such interfaces please refer to Constantinou et al. (1999).

frictionModel VDependent $frnTag $muSlow $muFast $transRate

$frnTag unique friction model object tag
$muSlow coefficient of friction at low velocity
$muFast coefficient of friction at high velocity
$transRate transition rate from low to high velocity


<math>t + \Delta t\!</math>

<math>\mu = {\mu _{fast}} - \left( {{\mu _{fast}} - {\mu _{slow}}} \right) \cdot {e^{ - transRate\, \cdot \,\left| v \right|}}\!</math>


EXAMPLES:

frictionModel VDependent 1 0.085 0.163 0.77



Code Developed by: Andreas Schellenberg, University of California, Berkeley.