OpenSees User: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 55: Line 55:
*[[Simulating a Centrifuge Test]]
*[[Simulating a Centrifuge Test]]
*[[Laterally-Loaded Pile Foundation|Laterally-Loaded Pile Foundation (Static Analysis)]]
*[[Laterally-Loaded Pile Foundation|Laterally-Loaded Pile Foundation (Static Analysis)]]
*[[One-dimensional Consolidation]]
*[[Site Response Analysis of a Layered Soil Column (Total Stress Analysis)| Total Stress Site Response Analysis of a Layered Soil Column]]
*[[Site Response Analysis of a Layered Soil Column (Total Stress Analysis)| Total Stress Site Response Analysis of a Layered Soil Column]]
*[[Effective Stress Site Response Analysis of a Layered Soil Column]]
*[[Effective Stress Site Response Analysis of a Layered Soil Column]]
*[[One-dimensional Consolidation]]
*[[Dynamic 2D Effective Stress Analysis of Slope|Dynamic Effective Stress Analysis of a Slope]]
*[[Dynamic 2D Effective Stress Analysis of Slope|Dynamic Effective Stress Analysis of a Slope]]
*[[GiD ProblemTypes for 2D Slope Analysis Input File Generation]]
*[[GiD ProblemTypes for 2D Slope Analysis Input File Generation]]

Revision as of 17:53, 3 November 2010

The OpenSees User pages are intended for users of the OpenSees applications:

  1. OpenSees.exe
  2. OpenSeesSP.exe
  3. OpenSeesMP.exe

These applications are all interpreters which interpret input written in an extended form of the Tcl programming language. The extensions to the Tcl language are for finite element analysis using the classes provided for in the OpenSees Framework.

User Documentation



The OpenSees Getting Started manual provides a step by step instruction on how to obtain, install, and use OpenSees. For users who have never used OpenSees or a command line interpreter, it is a useful document to read before you go any further.




The OpenSees Command Manual is now in wiki form. Users and code developers are encouraged to add and correct the manual as the see fit.
The Command Manual details those new commands that have been added to Tcl by the OpenSees interpreters.
In the command manual we only detail those commands added to Tcl for finite element programming.




The OpenSees Examples Manual contains examples on how to create models and perform simulations on those models.
It has examples ranging from simple single element linear models to complex 3D nonlinear fiber models.
These examples are intended only to show the usage of the commands available in OpenSees. They are not necessarily examples showing the best of practice.

Practical Examples





Geotechnical Examples

Structural Examples


Reliability/Sensitivity Examples

Tools and Applications

  1. : a Real-Time Interface, graphical and scriptical, for Numerical Simulation in OpenSees
  2. | OpenSees Navigator