Quad Element: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 6: Line 6:
| style="background:yellow; color:black; width:800px" | '''element quad $eleTag $iNode $jNode $kNode $lNode $thick $type $matTag <$pressure $rho $b1 $b2>'''
| style="background:yellow; color:black; width:800px" | '''element quad $eleTag $iNode $jNode $kNode $lNode $thick $type $matTag <$pressure $rho $b1 $b2>'''
|}
|}


----
----

Revision as of 21:45, 25 March 2010




This command is used to construct a FourNodeQuad element object which uses a bilinear isoparametric formulation.

element quad $eleTag $iNode $jNode $kNode $lNode $thick $type $matTag <$pressure $rho $b1 $b2>


$eleTag unique element object tag
$iNode $jNode $kNode $lNode four nodes defining element boundaries, input in counter-clockwise order around the element.
$thick element thickness
$type string representing material behavior. The type parameter can be either "PlaneStrain" or "PlaneStress."
$matTag tag of nDMaterial
$pressure surface pressure (optional, default = 0.0)
$rho element mass density (per unit volume) from which a lumped element mass matrix is computed (optional, default=0.0)
$b1 z$b2 constant body forces defined in the isoparametric domain (optional, default=0.0)


NOTE:

  1. Consistent nodal loads are computed from the pressure and body forces.
  2. The valid queries to a Quad element when creating an ElementRecorder object are 'forces', 'stresses,' and 'material $matNum matArg1 matArg2 ...' Where $matNum refers to the material object at the integration point corresponding to the node numbers in the isoparametric domain.


EXAMPLE:



Code Developed by: Micheal Scott, Oregon State