ZeroLength Element

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

This command is used to construct a zeroLength element object, which is defined by two nodes at the same location. The nodes are connected by multiple UniaxialMaterial objects to represent the force-deformation relationship for the element.

element zeroLength $eleTag $iNode $jNode -mat $matTag1 $matTag2 ... -dir $dir1 $dir2 ... <-orient $x1 $x2 $x3 $yp1 $yp2 $yp3>

---

$eleTag	unique element object tag
$iNode $jNode	end nodes
$matTag1 $matTag2 ...	tags associated with previously-defined UniaxialMaterials
$dir1 $dir2 ...	material directions: 1,2,3 - translation along local x,y,z axes, respectively 4,5,6 - rotation about local x,y,z axes, respectively
$x1 $x2 $x3	vector components in global coordinates defining local x-axis (optional)
$yp1 $yp2 $yp3	vector components in global coordinates defining vector yp which lies in the local x-y plane for the element. (optional)

NOTE:

If the optional orientation vectors are not specified, the local element axes coincide with the global axes. Otherwise the local z-axis is defined by the cross product between the vectors x and yp vectors specified on the command line.

The valid queries to a zero-length element when creating an ElementRecorder object are 'force,' 'deformation,' 'stiff,' and 'material $matNum matArg1 matArg2 ...' Where $matNum is the tag associated with the material whose data is to be output.

EXAMPLE:

element zeroLength 1 2 4 -mat 5 6 -dir 1 2; # truss tag 1 between nodes 2 and 4 acting in directions 1 and 2 with materials 5 and 6 respectively.

---

Code Developed by: Gregory L. Fenves, University of Texas, Austin.