Bounding Cam Clay: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 28: | Line 28: | ||
| '''$m ''' || hardening parameter | | '''$m ''' || hardening parameter | ||
|} | |} | ||
The material formulations for the BoundingCamClay object are "ThreeDimensional" and "PlaneStrain" | The material formulations for the BoundingCamClay object are "ThreeDimensional" and "PlaneStrain" | ||
| Line 40: | Line 39: | ||
---- | ---- | ||
Code Developed by: | Code Developed by: Chris McGann & [http://www.ce.washington.edu/people/faculty/faculty.php?id=2 Pedro Arduino], at the University of Washington | ||
---- | ---- | ||
Revision as of 09:22, 23 May 2016
- Command_Manual
- Tcl Commands
- Modeling_Commands
- model
- uniaxialMaterial
- ndMaterial
- frictionModel
- section
- geometricTransf
- element
- node
- sp commands
- mp commands
- timeSeries
- pattern
- mass
- block commands
- region
- rayleigh
- Analysis Commands
- Output Commands
- Misc Commands
- DataBase Commands
This command is used to construct an multi dimensional material object that has a Bounding surface Cam Clay yield criterium.
| nDMaterial BoundingCamClay $matTag $massDensity $C $bulkMod $OCR $mu_o $alpha $lambda $h $m |
| $matTag | integer tag identifying material |
| $massDensity | mass density |
| $C | ellipsoidal axis ratio |
| $bulkMod | initial bulk modulus |
| $OCR | overconsolidation ratio |
| $mu_o | elastic shear modulus |
| $alpha | pressure-dependent parameter |
| $lambda | soil compressibility index for virgin loading |
| $h | hardening parameter |
| $m | hardening parameter |
The material formulations for the BoundingCamClay object are "ThreeDimensional" and "PlaneStrain"
NOTES:
EXAMPLES:
Code Developed by: Chris McGann & Pedro Arduino, at the University of Washington
EXAMPLE ANALYSIS: