EleResponse Command: Difference between revisions

Latest revision as of 18:22, 12 August 2010

This command is used to obtain the same element quantities as those obtained from the element recorder at a particular time step.

eleResponse $eleTag $arg1 $arg2

$eleTag	integer tag identifying element
$arg1, $arg2	same arguments as those specified in element recorder. These arguments are specific to the type of element being used.

EXAMPLE:

For a simple truss example if these are the recorder commands used:

recorder Element -time -ele 1 2 3 -file a.out axialForce

recorder Element -time -ele 1 2 3 -file b.out material stress

then these are the corresponding eleResponse commands

set a [eleResponse 1 forces]

set b [eleResponse 1 material stress]

Code Developed by: fmk

@@ Line 1: / Line 1: @@
-This command is used to obtain the same element quantities as those obtained from the [[Element Recorder Command | element recorder]] at a particular time step.
+{{CommandManualMenu}}
+This command is used to obtain the same element quantities as those obtained from the [[Element Recorder | element recorder]] at a particular time step.
 {|
@@ Line 11: / Line 12: @@
 |  style="width:150px" | '''$eleTag ''' || integer tag identifying element
 |-
-|  '''$arg1, $arg2''' ||  same arguments as those specified in [[Element Recorder Command | element recorder]]. These arguments are specific to the type of element being used.
+|  '''$arg1, $arg2''' ||  same arguments as those specified in [[Element Recorder | element recorder]]. These arguments are specific to the type of element being used.
 |}