Linear Algorithm: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
mNo edit summary |
||
| (One intermediate revision by one other user not shown) | |||
| Line 7: | Line 7: | ||
{| | {| | ||
| style="background: | | style="background:lightgreen; color:black; width:800px" | '''algorithm Linear <-initial> <-factorOnce>''' | ||
|} | |} | ||
| Line 21: | Line 21: | ||
---- | ---- | ||
NOTES | NOTES | ||
1) as the tangent matrix typically will not change during the analysis in case of an elastic system it is highly | 1) as the tangent matrix typically will not change during the analysis in case of an elastic system it is highly advantageous | ||
to use the -factorOnce option. Do not use this option if you have a nonlinear system and you want the tangent used to be actual tangent at time of the analysis step. | to use the -factorOnce option. Do not use this option if you have a nonlinear system and you want the tangent used to be actual tangent at time of the analysis step. | ||
Latest revision as of 07:53, 9 June 2016
- Command_Manual
- Tcl Commands
- Modeling_Commands
- model
- uniaxialMaterial
- ndMaterial
- frictionModel
- section
- geometricTransf
- element
- node
- sp commands
- mp commands
- timeSeries
- pattern
- mass
- block commands
- region
- rayleigh
- Analysis Commands
- Output Commands
- Misc Commands
- DataBase Commands
This command is used to construct a Linear algorithm object which takes one iteration to solve the system of equations.
- <math> \Delta U = - K^{-1}R(U),\!</math>
| algorithm Linear <-initial> <-factorOnce> |
| -secant | optional flag to indicate to use secant stiffness |
| -initial | optional flag to indicate to use initial stiffness |
| -factorOnce | optional flag to indicate to only set up and factor matrix once |
NOTES 1) as the tangent matrix typically will not change during the analysis in case of an elastic system it is highly advantageous to use the -factorOnce option. Do not use this option if you have a nonlinear system and you want the tangent used to be actual tangent at time of the analysis step.
Code Developed by: fmk