ElasticBilin Material: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(One intermediate revision by the same user not shown)
Line 30: Line 30:


[[Image:ElasticPP.gif]]
[[Image:ElasticPP.gif]]
NOTE:
eps0 can not be controlled. It is always zero.


----
----

Latest revision as of 00:00, 1 September 2011




This command is used to construct an elastic bilinear uniaxial material object. Unlike all other bilinear materials, the unloading curve follows the loading curve exactly.


uniaxialMaterial ElasticBilin $matTag $EP1 $EP2 $epsP2 <$EN1 $EN2 $epsN2>


$matTag integer tag identifying material
$EP1 tangent in tension for stains: 0 <= strains <= $epsP2
$EP2 tangent when material in tension with strains > $epsP2
$epsP2 strain at which material changes tangent in tension.
$EN1 optional, default = $EP1. tangent in compression for stains: 0 < strains <= $epsN2
$EN2 optional, default = $EP2. tangent in compression with strains < $epsN2
$epsN2 optional, default = -epsP2. strain at which material changes tangent in compression.


NOTE:

eps0 can not be controlled. It is always zero.



Code Developed by: fmk