Tri31 Element: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
m (New Triangular element (Tri31))
m (Note on material mass density)
 
(2 intermediate revisions by one other user not shown)
Line 4: Line 4:


{|  
{|  
| style="background:yellow; color:black; width:800px" | '''element quad $eleTag $iNode $jNode $kNode $thick $type $matTag <$pressure $rho $b1 $b2>'''
| style="background:yellow; color:black; width:800px" | '''element tri31 $eleTag $iNode $jNode $kNode $thick $type $matTag <$pressure $rho $b1 $b2>'''
|}
|}


Line 23: Line 23:
| '''$pressure''' || surface pressure (optional, default = 0.0)
| '''$pressure''' || surface pressure (optional, default = 0.0)
|-
|-
| '''$rho''' || element mass density (per unit volume) from which a lumped element mass matrix is computed (optional, default=0.0)
| '''$rho''' || element mass density (per unit volume) from which a lumped element mass matrix is computed (optional, default=0.0; if rho=0.0, then materials are queried for mass density)
|-
|-
| '''$b1 z$b2''' || constant body forces defined in the domain (optional, default=0.0)
| '''$b1 $b2''' || constant body forces defined in the domain (optional, default=0.0)
|}
|}


Line 35: Line 35:
----
----


Code Developed by: <span style="color:blue"> [http://www2.decf.berkeley.edu/~roozbehg/index.html Roozbeh G. Mikola], UC Berkeley</span> and <span style="color:blue"> [http://www.ce.berkeley.edu/~sitar/ N. Sitar], UC Berkeley</span>
Code Developed by: <span style="color:blue"> [http://www.roozbehgm.com/ Roozbeh G. Mikola], UC Berkeley</span> and <span style="color:blue"> [http://www.ce.berkeley.edu/~sitar/ N. Sitar], UC Berkeley</span>

Latest revision as of 21:49, 17 June 2020




This command is used to construct a constant strain triangular element (Tri31) which uses three nodes and one integration points.

element tri31 $eleTag $iNode $jNode $kNode $thick $type $matTag <$pressure $rho $b1 $b2>


$eleTag unique element object tag
$iNode $jNode $kNode three nodes defining element boundaries, input in counter-clockwise order around the element.
$thick element thickness
$type string representing material behavior. The type parameter can be either "PlaneStrain" or "PlaneStress."
$matTag tag of nDMaterial
$pressure surface pressure (optional, default = 0.0)
$rho element mass density (per unit volume) from which a lumped element mass matrix is computed (optional, default=0.0; if rho=0.0, then materials are queried for mass density)
$b1 $b2 constant body forces defined in the domain (optional, default=0.0)


NOTE:

  1. Consistent nodal loads are computed from the pressure and body forces.
  2. The valid queries to a Tri31 element when creating an ElementRecorder object are 'forces', 'stresses,' and 'material $matNum matArg1 matArg2 ...' Where $matNum refers to the material object at the integration point corresponding to the node numbers in the domain.

Code Developed by: Roozbeh G. Mikola, UC Berkeley and N. Sitar, UC Berkeley