Hilber-Hughes-Taylor Method: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(8 intermediate revisions by the same user not shown)
Line 1: Line 1:
This command is used to construct a Hilber-Hughes-Taylor (HHT) integration object.  This is an implicit method that increases the amount of numerical damping that is provided by the Newmark method. Depending on choices of input parameters, the method can be unconditionally stable.
{{CommandManualMenu}}
 
This command is used to construct a Hilber-Hughes-Taylor (HHT) integration object.  This is an implicit method that allows for energy dissipation and second order accuracy (which is not possible with the regular Newmark method). Depending on choices of input parameters, the method can be unconditionally stable.


{|  
{|  
Line 20: Line 22:




integrator HHT 0.5
integrator HHT 0.9




NOTES:
NOTES:
<math>\alpha</math> is defined differently that in the paper, we use <math>\alpha = (\alpha_{HHT} - 1})</math> where <math>\alpha_{HHT}</math> is that used in the paper.
# Like Newmark and all the implicit schemes, the unconditional stability of this method applies to linear problems. There are no results showing stability of this method over the wide range of nonlinear problems that potentially exist. Experience indicates that the time step for implicit schemes in nonlinear situations can be much greater than those for explicit schemes.
# <math> \alpha = 1.0</math> corresponds to the Newmark method.
# <math> \alpha = 1.0</math> corresponds to the Newmark method.
# <math> \alpha</math> should be between 0.5 and 1.0
# <math> \alpha</math> should be between 0.67 and 1.0. The smaller the <math>\alpha</math> the greater the numerical damping.
# <math>\gamma</math> and <math>\beta</math>are optional. The default values are
# <math>\gamma</math> and <math>\beta</math> are optional. The default values ensure the method is second order accurate and unconditionally stable when <math>\alpha</math> is <math>\tfrac{2}{3} <= \alpha <= 1.0</math>. The defaults are:


<math> \beta = \frac{(2 - \alpha)^2}{4}</math>
:<math> \beta = \frac{(2 - \alpha)^2}{4}</math>


and
and


<math> \gamma = \frac{3}{2} - \alpha</math>
:<math> \gamma = \frac{3}{2} - \alpha</math>


REFERENCES
REFERENCES


Hilber, H.M, Hughes,T.J.R and Talor, R.L.  "Improved Numerical Dissipation for Time Integration Algorithms in Structural Dynamics" Earthquake Engineering and Structural Dynamics, 5:282-292, 1977.
Hilber, H.M, Hughes,T.J.R and Talor, R.L.  "Improved Numerical Dissipation for Time Integration Algorithms in Structural Dynamics" Earthquake Engineering and Structural Dynamics, 5:282-292, 1977.
note: the definition of <math>\alpha</math> is different from the original paper and in the book by Hughes.


----
----
Line 46: Line 48:




The HHT method (sometimes called the <math> \alpha</math> method) is a one step implicit method for solving the transient problem which attempts to increase the amount of numerical damping present without degrading the order of accuracy. In the HHT the same Newmark approximations are used
The HHT method (sometimes called the <math> \alpha</math> method) is a one step implicit method for solving the transient problem which attempts to increase the amount of numerical damping present without degrading the order of accuracy. In the HHT method, the same Newmark approximations are used:


<math> U_{t+\Delta t} = U_t + \Delta t \dot U_t + [(0.5 - \beta) \Delta t^2] \ddot U_t + [\beta \Delta t^2]  \ddot U_{t+\Delta t}</math>
:<math> U_{t+\Delta t} = U_t + \Delta t \dot U_t + [(0.5 - \beta) \Delta t^2] \ddot U_t + [\beta \Delta t^2]  \ddot U_{t+\Delta t}</math>


<math> \dot U_{t+\Delta t} = \dot U_t + [(1-\gamma)\Delta t] \ddot U_t + [\gamma \Delta t ] \ddot U_{t+\Delta t} </math>
:<math> \dot U_{t+\Delta t} = \dot U_t + [(1-\gamma)\Delta t] \ddot U_t + [\gamma \Delta t ] \ddot U_{t+\Delta t} </math>


but the time-discrete momentum equation is modified:
but the time-discrete momentum equation is modified:


<math>R_{t + \alpha \Delta t} =  F_{t+\Delta t}^{ext} - M \ddot U_{t + \Delta t} - C \dot U_{t+\alpha \Delta t} - F^{int}(U_{t + \alpha \Delta t})  
:<math>R_{t + \alpha \Delta t} =  F_{t+\Delta t}^{ext} - M \ddot U_{t + \Delta t} - C \dot U_{t+\alpha \Delta t} - F^{int}(U_{t + \alpha \Delta t})  
</math>
</math>


where the displacements and velocities at the intermediate point are given by:
where the displacements and velocities at the intermediate point are given by:


<math>U_{t+ \alpha \Delta t} = (1 - \alpha) U_t + \alpha U_{t + \Delta t}</math>
:<math>U_{t+ \alpha \Delta t} = (1 - \alpha) U_t + \alpha U_{t + \Delta t}</math>


<math>\dot U_{t+\alpha \Delta t} = (1-\alpha) \dot U_t + \alpha \dot U_{t + \Delta t}</math>
:<math>\dot U_{t+\alpha \Delta t} = (1-\alpha) \dot U_t + \alpha \dot U_{t + \Delta t}</math>


Following the methods outlined for Newmarks method, loinearization of the nonlinear momentum equation results in the following linear equations:


The advancement of the nonlinear solution from one step to the next requires setting initial conditions at the first trial step<math> U_{t+\Delta t}^0, \dot U_{t+\Delta t}^0, \ddot U_{t+\Delta t}^0</math> linearization of the equation, and solution of the linearized equations and updating. When the displacements are the unknowns this results in the following:  
:<math> K_{t+\Delta t}^{*i} d U_{t+\Delta t}^{i+1} = R_{t+\Delta t}^i</math>
 
1) Initial Conditions at a time step: For an implicit solution we choose:
 
<math>U_{t+\Delta t}^0 = U_t</math>
 
The values for the velocity and accelerations are determined using the Newmark formulas.
 
<math>\dot U_{t+\Delta t}^0 =  (1 - \frac{\gamma}{\beta}) \dot U_t + \Delta t(1 - \frac{\gamma}{2 \beta}) \ddot U_t</math>
 
<math>\ddot U_{t+\Delta t}^0 = - \frac{1}{\beta \Delta t} \dot U_t - (\frac{1}{2 \beta} -1) \ddot U_t </math>
 
2) Linearizing the Newmark formulas
 
<math>dU_{t+\Delta t}^{i+1} = \beta \Delta t^2 d \ddot U_{t+\Delta t}^{i+1}</math>
 
<math>\dot U_{t+\Delta t}^{i+1} = \gamma \Delta t \ddot U_{t+\Delta t}^{i+1}</math>
 
giving the update formula when displacement increment is used as unknown as:
 
<math>U_{t+\Delta t}^{i+1} = U_{t+\Delta t}^i + dU_{t+\Delta t}^{i+1}</math>
 
<math>\dot U_{t+\Delta t}^{i+1} = \dot U_{t+\Delta t}^i + \frac{\gamma}{\beta \Delta t}dU_{t+\Delta t}^{i+1}</math>
 
<math>\ddot U_{t+\Delta t}^{i+1} = \ddot U_{t+\Delta t}^i + \frac{1}{\beta \Delta t^2}dU_{t+\Delta t}^{i+1}</math>
 
The linearization of the momentum equation using the displacements as the unknowns leads to the following
 
<math> K_{t+\Delta t}^{*i} d U_{t+\Delta t}^{i+1} = R_{t+\Delta t}^i</math>


where
where


<math>K_{t+\Delta t}^{*i} = \alpha K_t + \frac{\alpha \gamma}{\beta \Delta t} C_t + \frac{1}{\beta \Delta t^2} M</math>
:<math>K_{t+\Delta t}^{*i} = \alpha K_t + \frac{\alpha \gamma}{\beta \Delta t} C_t + \frac{1}{\beta \Delta t^2} M</math>


and
and


<math> R_{t+\Delta t}^i = F_{t + \Delta t}^{ext} - F(U_{t + \alpha \Delta t}^{i-1})^{int} - C \dot U_{t+\alpha \Delta t}^{i-1} - M \ddot U_{t+ \Delta t}^{i-1}</math>
:<math> R_{t+\Delta t}^i = F_{t + \Delta t}^{ext} - F(U_{t + \alpha \Delta t}^{i-1})^{int} - C \dot U_{t+\alpha \Delta t}^{i-1} - M \ddot U_{t+ \Delta t}^{i-1}</math>
 


The linear equations are used to solve for <math> U_{t+\alpha \Delta t}, \dot U_{t + \alpha \Delta t}  \ddot U_{t+\Delta t}</math>. Once convergence has been achieved the displacements and velocities at time <math>t + \Delta t</math> can be computed.


----
----


Code Developed by: <span style="color:blue"> fmk </span>
Code Developed by: <span style="color:blue"> fmk </span>

Latest revision as of 19:19, 11 June 2015




This command is used to construct a Hilber-Hughes-Taylor (HHT) integration object. This is an implicit method that allows for energy dissipation and second order accuracy (which is not possible with the regular Newmark method). Depending on choices of input parameters, the method can be unconditionally stable.

integrator HHT $alpha <$gamma $beta>

$alpha <math>\alpha</math> factor
$gamma <math>\gamma</math> factor
$beta <math>\beta</math> factor

EXAMPLE:


integrator HHT 0.9


NOTES: <math>\alpha</math> is defined differently that in the paper, we use <math>\alpha = (\alpha_{HHT} - 1})</math> where <math>\alpha_{HHT}</math> is that used in the paper.

  1. Like Newmark and all the implicit schemes, the unconditional stability of this method applies to linear problems. There are no results showing stability of this method over the wide range of nonlinear problems that potentially exist. Experience indicates that the time step for implicit schemes in nonlinear situations can be much greater than those for explicit schemes.
  2. <math> \alpha = 1.0</math> corresponds to the Newmark method.
  3. <math> \alpha</math> should be between 0.67 and 1.0. The smaller the <math>\alpha</math> the greater the numerical damping.
  4. <math>\gamma</math> and <math>\beta</math> are optional. The default values ensure the method is second order accurate and unconditionally stable when <math>\alpha</math> is <math>\tfrac{2}{3} <= \alpha <= 1.0</math>. The defaults are:
<math> \beta = \frac{(2 - \alpha)^2}{4}</math>

and

<math> \gamma = \frac{3}{2} - \alpha</math>

REFERENCES

Hilber, H.M, Hughes,T.J.R and Talor, R.L. "Improved Numerical Dissipation for Time Integration Algorithms in Structural Dynamics" Earthquake Engineering and Structural Dynamics, 5:282-292, 1977.



THEORY:


The HHT method (sometimes called the <math> \alpha</math> method) is a one step implicit method for solving the transient problem which attempts to increase the amount of numerical damping present without degrading the order of accuracy. In the HHT method, the same Newmark approximations are used:

<math> U_{t+\Delta t} = U_t + \Delta t \dot U_t + [(0.5 - \beta) \Delta t^2] \ddot U_t + [\beta \Delta t^2] \ddot U_{t+\Delta t}</math>
<math> \dot U_{t+\Delta t} = \dot U_t + [(1-\gamma)\Delta t] \ddot U_t + [\gamma \Delta t ] \ddot U_{t+\Delta t} </math>

but the time-discrete momentum equation is modified:

<math>R_{t + \alpha \Delta t} = F_{t+\Delta t}^{ext} - M \ddot U_{t + \Delta t} - C \dot U_{t+\alpha \Delta t} - F^{int}(U_{t + \alpha \Delta t})

</math>

where the displacements and velocities at the intermediate point are given by:

<math>U_{t+ \alpha \Delta t} = (1 - \alpha) U_t + \alpha U_{t + \Delta t}</math>
<math>\dot U_{t+\alpha \Delta t} = (1-\alpha) \dot U_t + \alpha \dot U_{t + \Delta t}</math>

Following the methods outlined for Newmarks method, loinearization of the nonlinear momentum equation results in the following linear equations:

<math> K_{t+\Delta t}^{*i} d U_{t+\Delta t}^{i+1} = R_{t+\Delta t}^i</math>

where

<math>K_{t+\Delta t}^{*i} = \alpha K_t + \frac{\alpha \gamma}{\beta \Delta t} C_t + \frac{1}{\beta \Delta t^2} M</math>

and

<math> R_{t+\Delta t}^i = F_{t + \Delta t}^{ext} - F(U_{t + \alpha \Delta t}^{i-1})^{int} - C \dot U_{t+\alpha \Delta t}^{i-1} - M \ddot U_{t+ \Delta t}^{i-1}</math>


The linear equations are used to solve for <math> U_{t+\alpha \Delta t}, \dot U_{t + \alpha \Delta t} \ddot U_{t+\Delta t}</math>. Once convergence has been achieved the displacements and velocities at time <math>t + \Delta t</math> can be computed.


Code Developed by: fmk