AxialSpHD Material: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
(Created page with '{{CommandManualMenu}} This command is used to construct a uniaxial AxialSpHD material object. This material model produces axial stress-strain curve of elastomeric bearings incl...')
 
No edit summary
 
(One intermediate revision by the same user not shown)
Line 15: Line 15:
|  '''$sce''' || compressive modulus
|  '''$sce''' || compressive modulus
|-
|-
|  '''$fty $fcy''' || yield stress under tension ('''$fty''') and compression ('''$fcy''')
|  '''$fty $fcy''' || yield stress under tension ('''$fty''') and compression ('''$fcy''') (see note 1)
|-
|-
|  '''$bte $bty $bth $bcy''' || reduction rate (see note 1)
|  '''$bte $bty $bth $bcy''' || reduction rate for tensile elastic range ('''$bte'''), tensile yielding ('''$bty'''), tensile hardening ('''$bth''') and compressive yielding ('''$bcy''') (see note 1)
|-
|-
|  '''$fcr ''' || target point stress (see note 2)
|  '''$fcr ''' || target point stress (see note 1)
|-
|-
|  '''$ath''' ||
|  '''$ath''' || hardening strain ratio to yield strain (see note 1)
|}
|}


NOTES:
NOTES:


1)
1) Input parameters are required to satisfy followings.
 
'''$fcy''' < 0.0 < '''$fty'''
 
0.0 <= '''$bty''' < '''$bth''' < '''$bte''' <= 1.0
 
0.0 <= '''$bcy''' <= 1.0
 
'''$fcy''' <= '''$fcr''' <= 0.0
 
1.0 <= '''$ath'''
 
[[Image:AxialSpHD_note1.png|250px]] &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; [[Image:AxialSpHD_note2.png|250px]]


----
----


EXAMPLE:
EXAMPLE:
[[Media:AxialSpHD_sample.tcl|AxialSpHD_sample.tcl]]
[[Image:AxialSpHD_StressStrain.png|300px]]
----
Code Developed by: <span style="color:blue"> mkiku </span>

Latest revision as of 06:04, 26 January 2015




This command is used to construct a uniaxial AxialSpHD material object. This material model produces axial stress-strain curve of elastomeric bearings including hardening behavior.

uniaxialMaterial AxialSpHD $matTag $sce $fty $fcy <$bte $bty $bth $bcy $fcr $ath>

$matTag integer tag identifying material
$sce compressive modulus
$fty $fcy yield stress under tension ($fty) and compression ($fcy) (see note 1)
$bte $bty $bth $bcy reduction rate for tensile elastic range ($bte), tensile yielding ($bty), tensile hardening ($bth) and compressive yielding ($bcy) (see note 1)
$fcr target point stress (see note 1)
$ath hardening strain ratio to yield strain (see note 1)

NOTES:

1) Input parameters are required to satisfy followings.

$fcy < 0.0 < $fty

0.0 <= $bty < $bth < $bte <= 1.0

0.0 <= $bcy <= 1.0

$fcy <= $fcr <= 0.0

1.0 <= $ath

     


EXAMPLE:

AxialSpHD_sample.tcl


Code Developed by: mkiku