DispBeamColumnWithSensitivity Element

• Sensitivity_Command_Manual
  • General Commands
    • reliability
    • parameter
    • addToParameter
    • updateParameter
    • sensitivityIntegrator
    • sensitivityAlgorithm
    • recorder
  • Material Commands
    • uniaxialMaterial
    • nDmaterial
  • Section Commands
    • Fiber
    • Elastic
    • Aggregator
  • Element Commands
    • dispBeamColumnWithSensitivity
    • quadWithSensitivity
    • bbarBrickWithSensitivity
  • Constraint Commands
    • Transformation

---

This command is used to construct a 2-D or 3-D distributed-plasticity displacement-based beam-column (frame) element.

element dispBeamColumnWithSensitivity $eleTag $iNode $jNode $numIntgrPts $secTag $transfTag <integration method>

---

$tag	integer tag identifying an existing parameter.
$iNode $jNode	end nodes.
$numIntgrPts	number of integration points along the element.
$secTag	identifier for previously-defined section object.
$transfTag	identifier for previously-defined coordinate-transformation (CrdTransf) object.
integration method	optional (available options = ‘Lobatto’ or ‘Legendre’, default = ‘Legendre’).

Currently, there are no sensitivity parameters in the ‘dispBeamColumnWithSensitivity’ element command.