UniaxialMaterial Commands

From OpenSeesWiki
Revision as of 05:32, 13 March 2011 by Foxchameleon (talk | contribs)
Jump to navigation Jump to search





SteelMP Material
This command is used to construct a uniaxial Menegotto-Pinto steel material object.
SmoothPSConcrete Material
This command is used to construct a uniaxial smoothed Popovics-Saenz concrete material object.
UniaxialJ2Plasticity Material
This command is used to construct a uniaxial J2 Plasticity material object with isotropic and kinematic hardening.
Hardening Material for Sensitivity
This command is used to construct a uniaxial material object with combined linear kinematic and isotropic hardening.
Concrete01 Material
This command is used to construct a uniaxial Kent-Scott-Park concrete material object with degraded linear unloading/reloading stiffness according to the work of Karsan-Jirsa and no tensile strength (refer to http://peer.berkeley.edu).
Steel01 Material for Sensitivity
This command is used to construct a uniaxial bilinear steel material object with kinematic hardening and optional isotropic hardening described by a non-linear evolution equation (refer to http://peer.berkeley.edu).
Elastic Material
This command is used to construct a linear elastic uniaxial material object (with optional material damping).