Examples: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 27: Line 27:
{{#menu:
{{#menu:
*Practical Examples
*Practical Examples
}}
<br><br>
{{#menu:
*[[Getting Started Examples| Getting Started Examples]]
}}
}}
<br><br>
<br><br>


{{#menu:
*[[Other Examples| Other Examples]]
}}
<br><br>


'''Geotechnical Examples'''
'''Geotechnical Examples'''
Line 64: Line 54:
*[[Calibration of Maxwell Material]]
*[[Calibration of Maxwell Material]]


{{#menu:
*Interesting Articles
}}
<br><br>


== Interesting Things ==


*[[Rigid Diaphragm Consequences]]
*[[Rigid Diaphragm Consequences]]
*[[Calling Matlab from a Scipt]]
*[[Calling Matlab from a Scipt]]

Revision as of 18:26, 15 March 2011



The OpenSees Basic Examples Manual contains examples for new users. It contains very simple examples on how to perform analysis of truss, frame and continuum models. It is a resource intended for new users of OpenSees. It only touches on the benefits that programming using the tcl language can provide.



The OpenSees Examples Manual contains examples on how to create models and perform simulations on those models.
It has examples ranging from simple single element linear models to complex 3D nonlinear fiber models.
These examples are intended only to show the usage of the commands available in OpenSees. They are not necessarily examples showing the best of practice.
New users to OpenSees are encouraged to use the Basic Examples Manual as this manual can be quite intimidating for new users.




The OpenSees Sensitivity Analysis contains commands and application examples on how to perform response sensitivity analysis.
These examples are intended only to show the usage of the commands available in OpenSees. They are not necessarily examples showing the best of practice.
  • Practical Examples




Geotechnical Examples

Structural Examples

Material Calibration Examples

  • Interesting Articles