UniaxialMaterial Commands: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
{{Sensitivity_Command_Manual}}
{{Sensitivity_Command_Manual}}


[[uniaxialMaterial]]
:;<h2>[[uniaxialMaterial Commands]]</h2>
 
: Several uniaxial materials are available for DDM-based FE response sensitivity computation.  
: Several uniaxial materials are available for DDM-based FE response sensitivity computation.  



Revision as of 05:34, 13 March 2011





uniaxialMaterial Commands

Several uniaxial materials are available for DDM-based FE response sensitivity computation.
SteelMP Material
This command is used to construct a uniaxial Menegotto-Pinto steel material object.
SmoothPSConcrete Material
This command is used to construct a uniaxial smoothed Popovics-Saenz concrete material object.
UniaxialJ2Plasticity Material
This command is used to construct a uniaxial J2 Plasticity material object with isotropic and kinematic hardening.
Hardening Material for Sensitivity
This command is used to construct a uniaxial material object with combined linear kinematic and isotropic hardening.
Concrete01 Material
This command is used to construct a uniaxial Kent-Scott-Park concrete material object with degraded linear unloading/reloading stiffness according to the work of Karsan-Jirsa and no tensile strength (refer to http://peer.berkeley.edu).
Steel01 Material for Sensitivity
This command is used to construct a uniaxial bilinear steel material object with kinematic hardening and optional isotropic hardening described by a non-linear evolution equation (refer to http://peer.berkeley.edu).
Elastic Material
This command is used to construct a linear elastic uniaxial material object (with optional material damping).