DDM-Based Response Sensitivity Computation Tcl Commands:: Difference between revisions
Foxchameleon (talk | contribs) No edit summary |
Foxchameleon (talk | contribs) No edit summary |
||
| Line 24: | Line 24: | ||
<!-- Material Commands --> | <!-- Material Commands --> | ||
<h1>[[Material Commands]]</h1> | <h1>[[Material Commands]]</h1> | ||
:;<h2>[[UniaxialMaterial Commands]]</h2> | :;<h2>[[UniaxialMaterial Commands]]</h2> | ||
This command is used to construct a uniaxial Menegotto-Pinto steel material object. | Several uniaxial materials are available for DDM-based FE response sensitivity computation. | ||
:;<h3>[[SteelMP Command]]</h3> | |||
This command is used to construct a uniaxial Menegotto-Pinto steel material object. | |||
---- | |||
Reference: | |||
Zona A., Barbato M., Conte J.P. (2005). “Finite element response sensitivity analysis of steel-concrete composite beams with deformable shear connection.” Journal of Engineering Mechanics (ASCE), 131(11):1126–1139. | |||
:;< | :;<h3>[[SmootPSConcrete Command]]</h3> | ||
This command is used to construct a uniaxial smoothed Popovics-Saenz concrete material object. | This command is used to construct a uniaxial smoothed Popovics-Saenz concrete material object. | ||
---- | |||
Reference: | Reference: | ||
Zona A., Barbato M., Conte J.P. (2005). “Finite element response sensitivity analysis of steel-concrete composite beams with deformable shear connection.” Journal of Engineering Mechanics (ASCE), 131(11):1126–1139. | Zona A., Barbato M., Conte J.P. (2005). “Finite element response sensitivity analysis of steel-concrete composite beams with deformable shear connection.” Journal of Engineering Mechanics (ASCE), 131(11):1126–1139. | ||
Revision as of 00:23, 12 January 2011
Created by: Quan Gu(UCSD),Joel P. Conte(UCSD), Michele Barbato(LSU), Yong Li(UCSD)
Return to Sensitivity Analysis User Page
- Sensitivity_Command_Manual
Introduction
The following Analysis commands are added to the interpreter to create the Analysis and perform the analysis:
General commands
This command creates the reliability domain in which the sensitivity, reliability and optimization components are kept. This reliability domain is parallel to the finite element (FE) domain in OpenSees. Currently, the commands for stand-alone sensitivity analysis (e.g., sensitivityIntegrator, sensitivityAlgorithm) are set in the reliability domain only and, thus, the ‘reliability’ command must be used before any stand-alone sensitivity analysis.
In DDM-based FE response sensitivity analysis, the sensitivity parameters can be material, geometry or discrete loading parameters.
Material Commands
Several uniaxial materials are available for DDM-based FE response sensitivity computation.
This command is used to construct a uniaxial Menegotto-Pinto steel material object.
Reference: Zona A., Barbato M., Conte J.P. (2005). “Finite element response sensitivity analysis of steel-concrete composite beams with deformable shear connection.” Journal of Engineering Mechanics (ASCE), 131(11):1126–1139.
This command is used to construct a uniaxial smoothed Popovics-Saenz concrete material object.
Reference: Zona A., Barbato M., Conte J.P. (2005). “Finite element response sensitivity analysis of steel-concrete composite beams with deformable shear connection.” Journal of Engineering Mechanics (ASCE), 131(11):1126–1139.