DDM-Based Response Sensitivity Computation Tcl Commands:: Difference between revisions

From OpenSeesWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 16: Line 16:


:;<h2>[[reliability Command]]</h2>
:;<h2>[[reliability Command]]</h2>
This command creates the reliability domain in which the sensitivity, reliability and optimization components are kept. This reliability domain is parallel to the finite element (FE) domain in OpenSees. Currently, the commands for stand-alone sensitivity analysis (e.g., sensitivityIntegrator, sensitivityAlgorithm) are set in the reliability domain only and, thus, the ‘reliability’ command must be used before any stand-alone sensitivity analysis.
:;<h2>[[parameter Command]]</h2>
:;<h2>[[parameter Command]]</h2>
In DDM-based FE response sensitivity analysis, the sensitivity parameters can be material, geometry or discrete loading parameters.


<!--        UniaxialMaterial Commands        -->
Several uniaxial materials are available for DDM-based FE response sensitivity computation.


<!--        UniaxialMaterial Commands        -->
  <h1>[[UniaxialMaterial Commands]]</h1>   
  <h1>[[UniaxialMaterial Commands]]</h1>   
This command is used to construct a uniaxial Menegotto-Pinto steel material object.


:;<h2>[[SteelMP Command]]</h2>
:;<h2>[[SteelMP Command]]</h2>
This command is used to construct a uniaxial smoothed Popovics-Saenz concrete material object.
Reference:
Zona A., Barbato M., Conte J.P. (2005). “Finite element response sensitivity analysis of steel-concrete composite beams with deformable shear connection.” Journal of Engineering Mechanics (ASCE), 131(11):1126–1139.
:;<h2>[[SmootPSConcrete Command]]</h2>
:;<h2>[[SmootPSConcrete Command]]</h2>

Revision as of 00:14, 12 January 2011

Created by: Quan Gu(UCSD),Joel P. Conte(UCSD), Michele Barbato(LSU), Yong Li(UCSD)


Return to Sensitivity Analysis User Page





Introduction

The following Analysis commands are added to the interpreter to create the Analysis and perform the analysis:


General commands

reliability Command

This command creates the reliability domain in which the sensitivity, reliability and optimization components are kept. This reliability domain is parallel to the finite element (FE) domain in OpenSees. Currently, the commands for stand-alone sensitivity analysis (e.g., sensitivityIntegrator, sensitivityAlgorithm) are set in the reliability domain only and, thus, the ‘reliability’ command must be used before any stand-alone sensitivity analysis.

parameter Command

In DDM-based FE response sensitivity analysis, the sensitivity parameters can be material, geometry or discrete loading parameters.

Several uniaxial materials are available for DDM-based FE response sensitivity computation.

UniaxialMaterial Commands

This command is used to construct a uniaxial Menegotto-Pinto steel material object.

SteelMP Command

This command is used to construct a uniaxial smoothed Popovics-Saenz concrete material object. Reference: Zona A., Barbato M., Conte J.P. (2005). “Finite element response sensitivity analysis of steel-concrete composite beams with deformable shear connection.” Journal of Engineering Mechanics (ASCE), 131(11):1126–1139.


SmootPSConcrete Command